研磨刀片
| 刀片 | 敘 述 | CCGT030102 | CCGT040102 | CCGW040102 | CCGH0602U | CCFT060204 | CCFW060204 | CCFT060204HP | CCMW060204 | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| NC30 |
 |
K20F、TiAlN鍍層適用於鑄鐵、碳鋼、合金鋼、不鏽鋼 | ● | ● | |||||||
| DM |
 |
PCD焊刃經拋光處理後，可用於精修表面加工且延長刀具壽命 | ● | ● | |||||||
| NC2032 |
 |
K20F、AlTiN 鍍層、適用於高速加工鑄鐵 | ● | ||||||||
| NC2033 |
 |
K20F、TiN鍍層、適用於碳鋼、合金鋼、不鏽鋼 | ● | ||||||||
| NC9031 |
 |
K20F、TiN鍍層、適用於鋁合金、銅及非鐵金 | ● | ||||||||
| NC9036 |
 |
K20F、DLC鍍層、壽命長、適用於鋁合金、銅及非鐵金屬 | ● | ● | ● | ||||||
| U-NC9036 |
 |
K20F、DLC鍍層、適用於鏡面加工 | ● | ||||||||
 |
Ic | 3.5 | 4.3 | 4.3 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | ||
| S | 1.4 | 1.8 | 1.8 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | |||
| rε | 0.2 | 0.2 | 0.2 | - | 0.4 | 0.4 | 0.4 | 0.4 | |||
切削資料
| 工件材質 | Cutting conditionsor surface finishes | Grade of insert | Cutting SpeedVc(m/min.) | feed ratef (mm/rev.) | Re0.2 | Re0.4 | |
| Ae (mm) | |||||||
| 碳鋼 | Regular cutting | NC2033 | 120-150-200 | 0.05-0.07-0.10 | 0.05 | 0.1 | |
| Interrupted cutting | NC30 | 100-120-140 | 0.04-0.05-0.08 | 0.05 | 0.1 | ||
| 合金鋼 | Regular cutting | NC2033 | 100-120-140 | 0.05-0.07-0.10 | 0.05 | 0.1 | |
| Interrupted cutting | NC30 | 80-100-120 | 0.04-0.05-0.08 | 0.05 | 0.1 | ||
| 不鏽鋼 | Regular cutting | NC2033 | 80-100-120 | 0.05-0.07-0.10 | 0.05 | 0.1 | |
| Interrupted cutting | NC30 | 70-80-100 | 0.05-0.07-0.10 | 0.05 | 0.1 | ||
| 鑄鐵 | Regular cutting | NC2032 | NC30 | 150-200-300 | 0.05-0.07-0.10 | 0.05 | 0.1 |
| Brass, Bronze and Al-alloy Si >6% | Regular cutting | NC9036 | NC9031 | 150-200-300 | 0.05-0.07-0.10 | 0.05 | 0.1 |
| Super mirror finish | U-NC9036 | 150-200-300 | 0.15-0.2-0.25 | 0.05 | |||
| 鋁，鋁合金 非鐵材質 | Regular cutting | NC9036 | NC9031 | 150-200-300 | 0.05-0.07-0.10 | 0.05 | 0.1 |
| Super finished | DM | 500-1000-2000 | 0.05-0.07-0.10 | 0.05 | 0.1 | ||
| Super mirror finish | U-NC9036 | 150-200-300 | 0.15-0.20-0.25 | 0.05 | |||
| 熱處理鋼 | Regular cutting | NC30 | 80-100-120 | 0.04-0.06-0.08 | 0.05 | 0.1 | |