30度45度60度可转位刻字刀 99619-X060
可转位刀杆
- 共用X060所有刀片
- 可装置6刃去毛刺刀片
| Order No. | Part No. | Shank | Ød | L | 螺絲 | 板手 |
|---|---|---|---|---|---|---|
| 99619-X060-06 | BC06-CT-X060-06 | Steel | 6 | 40 |
 NS-22044
0.9Nm |
 NK-T7 |
| 99619-X060-06L | BC06-CT-X060-06L | Carbide | 6 | 60 | ||
| 99619-X060-06LS | BC06-CT-X060-06LS | Steel | 6 |
XC60A**R***
可转位刀片
- NC2032 :• 应用于＜HRC40之钢材，合金钢，铸铁
- NC2035 :• ALDURA镀层 •应用于硬化钢可达HRC56
- XP9001 :• 镜面刀片，应用于非铁金属，铝合金，铜合金， 塑胶，压克力
| 角度 | Part No. | 鍍層 | 材 質 | 尺寸 | R max. Depth | Wmax. | Tmax | ||||
| L | S | Re | |||||||||
| 30° | X060A30R020 | NC2032 | TiN | K20F |
 |
6 | 2.05 | 0.2 | 0.15 | 0.84 | 2.0 |
| NC2035 | ALDURA | ||||||||||
| XP9001 | Polished | ||||||||||
| 45° | X060A45R020 | NC2032 | TiN | K20F | 6 | 2.05 | 0.2 | 0.12 | 1.1 | 1.0 | |
| NC2035 | ALDURA | ||||||||||
| XP9001 | Polished | ||||||||||
| 60° | X060A60R020 | NC2032 | TiN | K20F | 6 | 2.05 | 0.2 | 0.10 | 1.39 | 1.0 | |
| NC2035 | ALDURA | ||||||||||
| XP9001 | Polished | ||||||||||
X060A**W***R
可转位刀片
- NC2032 :• 应用于＜HRC40之钢材，合金钢，铸铁
- NC2035 :• ALDURA镀层 •应用于硬化钢可达HRC56
- XP9001 :• 镜面刀片，应用于非铁金属，铝合金，铜合金， 塑胶，压克力
| 角度 | Part No. | 鍍層 | 材 質 | 尺寸 | R max. Depth | Wmax. | Tmax | ||||
| L | S | Re | |||||||||
| 30° | X060A30W020R | NC2032 | TiN | K20F |
|
6 | 2.05 | 0.04 | 0.20 | 0.74 | 1.0 |
| NC2035 | ALDURA | ||||||||||
| XP9001 | Polished | ||||||||||
| 45° | X060A45W020R | NC2032 | TiN | K20F | 6 | 2.05 | 0.04 | 0.20 | 1.03 | 1.0 | |
| NC2035 | ALDURA | ||||||||||
| XP9001 | Polished | ||||||||||
| 60° | X060A60W020R | NC2032 | TiN | K20F | 6 | 2.05 | 0.04 | 0.20 | 1.36 | 1.0 | |
| NC2035 | ALDURA | ||||||||||
| XP9001 | Polished | ||||||||||
X060A**T6
可转位刀片
- 去除孔毛刺
- 最小倒角直径ø0.5mm
- TIALN镀层，刀具寿命佳
- NC2032 :• 适用钢铁＜HRC40，铸铁，铝合金，非铁金属
| Part No. | 角度 | 鍍層 | 材 質 | 尺寸 | Tmax | AP (每刀切深) | ||||
| L | S | Re | min. | max. | ||||||
| X060A30W020R | 60° | TiAlN | K20F |
 |
6 | 2.0 | - | 1.8 | 0.05 | 0.5 |
| X060A90T6-NC2032 | 90° | |||||||||
